Lighting
60-160 PAR is a starting range; fleshy tissue should expand without paling, stretching, or pulling against skeleton.
Lobophyllia spp.
Use this Lobophyllia Coral profile to compare thick fleshy lobes with Brain Coral and Trachyphyllia Coral, plan conservative spacing, and watch for lobe edge recession under moderate flow.
Compare thick fleshy lobes, care range, and nearby lookalikes while checking an ID.
Snapshot
Care note
This entry has low confidence or is marked for expert review. Treat the ranges as conservative starting points and compare them with your own system.
Images
Photos are shown only when a source includes reusable license metadata. Always verify appearance against the coral in your own lighting and flow.
Primary reference: Stan Shebs
Source: Wikimedia Commons. License: CC BY-SA 3.0
Photo: Michelle Jonker
Source: Wikimedia Commons. License: CC BY 4.0
Photo: Michelle Jonker
Source: Wikimedia Commons. License: CC BY 4.0
Ranges
These ranges are approximate starting points from the coral database and should be adjusted to the stability and history of your system.
Care
60-160 PAR is a starting range; fleshy tissue should expand without paling, stretching, or pulling against skeleton.
moderate indirect flow should move tissue gently without folding it into sharp skeleton or neighbors.
For Lobophyllia Coral, verify salinity and alkalinity trends before changing placement; repeated moves and direct corrective swings can irritate fleshy tissue.
Lobophyllia Coral requirements vary by specimen, aquaculture history, shipping stress, and tank maturity; use these ranges as starting points, not guarantees.
Feeding
ID
For Lobophyllia Coral, start with thick fleshy lobes, large valleys or heads, and heavy skeleton before checking color. Compare it with Brain Coral and Trachyphyllia Coral by looking at corallite walls, polyp shape, tissue inflation, and where recession begins, especially after polyps or tissue are fully extended. Because trade photos can exaggerate color, skeleton shape, polyp layout, and expansion pattern are stronger clues than color alone.
Placement
Compatibility depends on specimen size, flow, growth, aggression, and spacing. Use these references conservatively and watch for contact over time.
Spacing recommendation: keep about 4 inches of clearance, then adjust based on extension and neighboring coral response.
Troubleshooting
Use these as troubleshooting checks, not a diagnosis. Symptoms may point to more than one issue.
Checklist
Compare
Neighbors
These corals are usually compatible with spacing, observation, and stable conditions. This is not a guarantee.
Usually compatible with spacing
Acan Coral
Micromussa lordhowensis
Usually compatible with spacing
Candy Cane Coral
Caulastrea furcata
Usually compatible with spacing
Blastomussa
Blastomussa wellsi / Blastomussa merleti
FAQs
Lobophyllia Coral is better treated as intermediate because placement, flow, feeding response, or aggression can vary by specimen.
Start Lobophyllia Coral low in the tank or on the sand/low rockwork when its tissue form allows it. Use 60-160 PAR and moderate flow as a starting point, then adjust from tissue extension, color, and nearby coral response.
Lobophyllia Coral may benefit from careful target feeding with mysis, small meaty foods, and LPS pellets. Use the listed frequency as a starting point: weekly or when feeder tentacles are extended. Feed only when the coral accepts food and avoid forcing food into stressed tissue.
Give Lobophyllia Coral about 4 inches of clearance as a starting point. Its database aggression level is Moderate. Use caution near Favia, Favites, and Chalice Coral. Avoid close placement with Torch Coral and Elegance Coral. Compatibility is not a guarantee, so check contact points as colonies expand.
Use this as a troubleshooting check. For Lobophyllia Coral, thick fleshy lobes deflate or pull back from bony edges and Lobophyllia Coral shows less normal extension, inflation, or feeding response than its recent baseline can indicate Lobophyllia Coral lobe edge recession. Likely causes to check include stinging contact, sand irritation, or too much direct flow and recent placement, lighting, flow, or chemistry changes affecting Lobophyllia Coral. Start with these database checks: check Lobophyllia Coral alkalinity trend and look for nearby stinging contact and reduce direct flow if tissue is pressed against skeleton.
For Lobophyllia Coral, verify salinity and alkalinity trends before changing placement; repeated moves and direct corrective swings can irritate fleshy tissue. The database lists 4 months as the minimum tank age and 20 gallons as the minimum tank size. For LPS-style care, protect fleshy tissue from repeated moves, direct flow, and abrupt chemistry corrections.
Coral Identifier
Use the app to compare photos, lookalikes, and key visual clues when you want a second pass on an ID.
Compare thick fleshy lobes, care range, and nearby lookalikes while checking an ID.