Lighting
50-150 PAR is a starting range; fleshy tissue should expand without paling, stretching, or pulling against skeleton.
Echinopora lamellosa
Hollywood Stunner Chalice care and ID profile for fast plating chalice, thin green plates, fast sweeper reach from thin plating edges, and practical placement decisions for mixed reef compatibility.
Compare fast plating chalice, care range, and nearby lookalikes while checking an ID.
Snapshot
Care note
This entry has low confidence or is marked for expert review. Treat the ranges as conservative starting points and compare them with your own system.
Images
Photos are shown only when a source includes reusable license metadata. Always verify appearance against the coral in your own lighting and flow.
Primary reference: Kerryn Johns
Source: Wikimedia Commons. License: CC BY 4.0
Photo: Paul Muir
Source: Wikimedia Commons. License: CC BY 4.0
Photo: Ryan McMinds / Joe Pollock
Source: Wikimedia Commons. License: CC BY 2.0
Ranges
These ranges are approximate starting points from the coral database and should be adjusted to the stability and history of your system.
Care
50-150 PAR is a starting range; fleshy tissue should expand without paling, stretching, or pulling against skeleton.
moderate indirect flow should move tissue gently without folding it into sharp skeleton or neighbors.
For Hollywood Stunner Chalice, verify salinity and alkalinity trends before changing placement; repeated moves and direct corrective swings can irritate fleshy tissue.
Hollywood Stunner Chalice requirements vary by specimen, aquaculture history, shipping stress, and tank maturity; use these ranges as starting points, not guarantees.
Feeding
ID
For Hollywood Stunner Chalice, start with fast plating chalice, thin green plates, and long sweeper tentacles before checking color. Compare it with Chalice Coral and Scroll Coral by looking at corallite walls, polyp shape, tissue inflation, and where recession begins, especially after polyps or tissue are fully extended. Because trade photos can exaggerate color, skeleton shape, polyp layout, and expansion pattern are stronger clues than color alone.
Placement
Compatibility depends on specimen size, flow, growth, aggression, and spacing. Use these references conservatively and watch for contact over time.
Spacing recommendation: keep about 6 inches of clearance, then adjust based on extension and neighboring coral response.
Troubleshooting
Use these as troubleshooting checks, not a diagnosis. Symptoms may point to more than one issue.
Checklist
Compare
Neighbors
These corals are usually compatible with spacing, observation, and stable conditions. This is not a guarantee.

Usually compatible with spacing
Favia
Dipsastraea spp. / Favia spp.

Usually compatible with spacing
Favites
Favites spp.
Usually compatible with spacing
Brain Coral
Trachyphyllia spp. / Lobophyllia spp. / Platygyra spp.
FAQs
Hollywood Stunner Chalice is better treated as intermediate because placement, flow, feeding response, or aggression can vary by specimen.
Start Hollywood Stunner Chalice low in the tank or on the sand/low rockwork when its tissue form allows it. Use 50-150 PAR and moderate flow as a starting point, then adjust from tissue extension, color, and nearby coral response.
Hollywood Stunner Chalice may benefit from careful target feeding with small meaty foods, mysis, and LPS pellets. Use the listed frequency as a starting point: weekly when feeding response is visible. Feed only when the coral accepts food and avoid forcing food into stressed tissue.
Give Hollywood Stunner Chalice about 6 inches of clearance as a starting point. Its database aggression level is High. Use caution near Acan Coral, Blastomussa, and Candy Cane Coral. Avoid close placement with Zoanthids, Mushroom Coral, and Acropora. Compatibility is not a guarantee, so check contact points as colonies expand.
Use this as a troubleshooting check. For Hollywood Stunner Chalice, thin plate edge sends long filaments and neighboring tissue retracts and Hollywood Stunner Chalice shows less normal extension, inflation, or feeding response than its recent baseline can indicate Hollywood Stunner Chalice fast sweeper reach from thin plating edges. Likely causes to check include aggressive growth, underestimated sweeper length, or placement too close to lower-aggression corals and recent placement, lighting, flow, or chemistry changes affecting Hollywood Stunner Chalice. Start with these database checks: check Hollywood Stunner Chalice alkalinity trend and look for nearby stinging contact and reduce direct flow if tissue is pressed against skeleton.
For Hollywood Stunner Chalice, verify salinity and alkalinity trends before changing placement; repeated moves and direct corrective swings can irritate fleshy tissue. The database lists 4 months as the minimum tank age and 25 gallons as the minimum tank size. For LPS-style care, protect fleshy tissue from repeated moves, direct flow, and abrupt chemistry corrections.
Coral Identifier
Use the app to compare photos, lookalikes, and key visual clues when you want a second pass on an ID.
Compare fast plating chalice, care range, and nearby lookalikes while checking an ID.