Lighting
60-160 PAR is a starting range; fleshy tissue should expand without paling, stretching, or pulling against skeleton.
Cycloseris spp. / Fungia spp.
Identify Orange Fungia Plate by single orange disc and radial ribs; then set low placement, moderate flow, and enough separation from Plate Coral and Scolymia Coral.
Compare single orange disc, care range, and nearby lookalikes while checking an ID.
Snapshot
Care note
This entry has low confidence or is marked for expert review. Treat the ranges as conservative starting points and compare them with your own system.
Images
Photos are shown only when a source includes reusable license metadata. Always verify appearance against the coral in your own lighting and flow.
Primary reference: Adriaan Gittenberger , Bert W. Hoeksema
Source: Wikimedia Commons. License: CC BY 3.0
Photo: Benzoni, F.
Source: Wikimedia Commons. License: CC BY 3.0
Photo: Bert W. Hoeksema
Source: Wikimedia Commons. License: CC BY 3.0
Ranges
These ranges are approximate starting points from the coral database and should be adjusted to the stability and history of your system.
Care
60-160 PAR is a starting range; fleshy tissue should expand without paling, stretching, or pulling against skeleton.
moderate indirect flow should move tissue gently without folding it into sharp skeleton or neighbors.
For Orange Fungia Plate, verify salinity and alkalinity trends before changing placement; repeated moves and direct corrective swings can irritate fleshy tissue.
Orange Fungia Plate requirements vary by specimen, aquaculture history, shipping stress, and tank maturity; use these ranges as starting points, not guarantees.
Feeding
ID
When Orange Fungia Plate is confused with Plate Coral and Scolymia Coral, the useful clues are single orange disc, radial ribs, and free-living sand placement. Color is secondary; structure, expansion pattern, and the first place tissue irritation appears are more reliable. Because trade photos can exaggerate color, skeleton shape, polyp layout, and expansion pattern are stronger clues than color alone.
Placement
Compatibility depends on specimen size, flow, growth, aggression, and spacing. Use these references conservatively and watch for contact over time.
Spacing recommendation: keep about 4 inches of clearance, then adjust based on extension and neighboring coral response.
Troubleshooting
Use these as troubleshooting checks, not a diagnosis. Symptoms may point to more than one issue.
Checklist
Compare
Neighbors
These corals are usually compatible with spacing, observation, and stable conditions. This is not a guarantee.
Usually compatible with spacing
Acan Coral
Micromussa lordhowensis
Usually compatible with spacing
Candy Cane Coral
Caulastrea furcata
Usually compatible with spacing
Blastomussa
Blastomussa wellsi / Blastomussa merleti
FAQs
Orange Fungia Plate is better treated as intermediate because placement, flow, feeding response, or aggression can vary by specimen.
Start Orange Fungia Plate low in the tank or on the sand/low rockwork when its tissue form allows it. Use 60-160 PAR and moderate flow as a starting point, then adjust from tissue extension, color, and nearby coral response.
Orange Fungia Plate may benefit from careful target feeding with mysis, small meaty foods, and LPS pellets. Use the listed frequency as a starting point: weekly or when feeder tentacles are extended. Feed only when the coral accepts food and avoid forcing food into stressed tissue.
Give Orange Fungia Plate about 4 inches of clearance as a starting point. Its database aggression level is Moderate. Use caution near Favia, Favites, and Chalice Coral. Avoid close placement with Torch Coral and Elegance Coral. Compatibility is not a guarantee, so check contact points as colonies expand.
Use this as a troubleshooting check. For Orange Fungia Plate, bright rim loses tissue or the coral remains tightly closed on the sand and Orange Fungia Plate shows less normal extension, inflation, or feeding response than its recent baseline can indicate Orange Fungia Plate edge recession on the orange plate rim. Likely causes to check include abrasion, excessive light after transfer, or debris sitting on the oral disc and recent placement, lighting, flow, or chemistry changes affecting Orange Fungia Plate. Start with these database checks: check Orange Fungia Plate alkalinity trend and look for nearby stinging contact and reduce direct flow if tissue is pressed against skeleton.
For Orange Fungia Plate, verify salinity and alkalinity trends before changing placement; repeated moves and direct corrective swings can irritate fleshy tissue. The database lists 4 months as the minimum tank age and 20 gallons as the minimum tank size. For LPS-style care, protect fleshy tissue from repeated moves, direct flow, and abrupt chemistry corrections.
Coral Identifier
Use the app to compare photos, lookalikes, and key visual clues when you want a second pass on an ID.
Compare single orange disc, care range, and nearby lookalikes while checking an ID.